If you wish to make your car look like brand new again, you will need to invest in auto detailing. Auto detailing involves a number of procedures that will ultimately give it a good sheen, brighter color and smoother operation. You have to know more about the process first and start looking for the right people and agencies that can help you boost the appearance. Here are some tips.
Basic Facts
Cars are considered a passion in many places all over the world. Auto detailing is different from waxing or washing. If you want it to look really new and clean, you will have to auto detail. There are a number of auto service centers that provide you the right type of work that will bring your car back to its ultimate condition. Auto detailing does more and focuses on both the outward and inner features of the car. The cost of auto detailing will vary, depending on the type of job you want done. You should always compare prices between service centers and what procedures are included in a given plan.
On Interior Auto Detailing
The goal of auto detailing is to restore and clean the car to its newest condition possible. This will involve some vacuuming and will at times be supported by taking the front and rear seats out temporarily. The upholstery also needs to be vacuumed thoroughly. After the vacuuming is done, mats, upholstery and mats are cleaned very well. Based on the current condition of the vehicle, the process will require a number of products like rug shampoo, spot cleaners and upholstery foam. Wet and dry vacuum cleaners are also required on cloth seats. Auto detailing takes out majority of stains and will make seats, leather and the carpet look really new. Physical damage can even be repaired.
Treating Vinyls
Vinyl regions found within the vehicle like the console, dashboard and door panel trim are also cleaned very well then treated with a conditioner to maintain the pliability of the material. Steering wheel covers and foot pedals are also treated to ensure that slipping is prevented. The face of the acrylic speedometer is polished to shine excellently, while small scratches and imperfections are rubbed out completely.
Airconditioning vents and heater vents may also be cleaned. The console and seams will also be rid of dirt and dust. The glass is fully cleaned and washed. This should be completely free of any films and streaks that show low angles of sunlight or nighttime headlights that may hinder proper vision.
Exterior Auto Detailing
Auto detailing on the outside will include cleaning the rims and wheels of dust and dirt. The rims and tire sidewalls are included. Wax residue is also eliminated. Blemishes found on the rails and hood are also taken out. Touch up paint may be applied as well in layers. One coat is applied then allowed to dry before the next. The entire process will take a number of hours, but the job is well worth the cost. It is ideal that car owners detail their vehicle once every few years.
If you want to give your car that special sheen and shine, you have to know how to polish your car the right way. There are plenty of products to choose from and a number of techniques to incorporate to get the best results. Car polishing involves proper observation of your vehicle as well so that you can maximize the effects and let the shine last longer.
Clean It First
You should first clean your vehicle thoroughly by bringing it to a carwash or just washing it yourself. This will get rid of the dirt and dust that can hinder the shine during the polishing. The dirt on the paint will also scratch the paint if you do not clean the car properly. If you are using a mechanical buffer, you might increase the chances of developing blemishes and scratches unless you get your car washed. You might also need to detail the finish of the car. The item you need is a bar of detailing clay that will take out hard to remove particles and substances found on the surface of the car, like tree sap or tar.
Slowly Polish
Start polishing using either your hands or a mechanical buffer. The advantage of using your hands is that you can control the pressure and can go for hard to reach nooks and surfaces on your car's exterior. The advantage of the mechanical buffer is speed and pressure, which keeps you from getting tired. It is recommended that you begin polishing on 2x2-foot areas each time. Move slowly over the entire car and allow the buffer to function excellently. You need to use overlapping strokes so that the buffer covers more area and you do not miss some important points.
Using the Buffer
The mechanical buffer also gives you the advantage of getting an even-looking polish. You also get the job done at a much faster rate than polishing by hand. Apply the polish initially by putting ample amounts on the buffer pad then spreading some on the finish of the car. Turn the buffer on. Be careful not to put too much polish on the pad or it might by thrown all over the place as the buffer starts to whirl.
The pad has to stay level to ensure that pressure is applied evenly. The polish section also needs to be buffed until everything is clear. Stop just before the polish dries. You need to observe how you will do the process. Certain details like putting the cord over your shoulder will help keep it out of the way and keep it from staying on the car's finish. When the buffer is running, you need to keep it in contact with the surface of the car then turn it off just before you lift it up.
Final Buffer Tips
The pad should never touch the ground at any time. If you have a single grain of dirt on the buffer, your car can end up with a lot of scratches and blemishes because of the quick and rotating movement. If the buffer lands on the ground, you should either clean it thoroughly or just replace it, regardless of how clean it still might look.
This website uses cookies that are necessary to its functioning and required to achieve the purposes illustrated in the privacy policy. By accepting this OR scrolling this page OR continuing to browse, you agree to our Privacy Policy