One of the joys of owning a car is the opportunity to have them displayed at car shows. Aside from bringing together auto lovers and buyers, car shows are a privilege to receive recognition for all your hard work. There are things you can do to improve the chance of bringing home the trophy or at least turning people’s heads while showcasing your vehicle works.
Remove the rust
Prior to car show, you’ll need to get rid of the rust from the vehicle. Use a fine sandpaper to remove visible rust. Finish with cloth and combine the sanded area into the remaining body. Wash and rinse the area before applying an oxide conversion agent that neutralizes small rusts in hard to reach areas.
If the oxide conversion agent dries, buff the area with cloth and auto pain in thin layers.
Wax and Polish
Give your car a wash and wax treatment prior to the car show. Use car soaps and wash the car under a shade to prevent the sun’s heat from affecting your work.
If your car has minor scratches, apply polish first before the wax. Polish removes the top layer of the coat and leaves the paint less prone to fading or scratch. Apply wax after polishing in a single layer rubbing it with microfiber cloth.
Tire Treatments
Judges are perfectionist about tires. Despite using the right tire for the model, tires must be new with several treads and no curb scuffs. For better chance of winning, you can buy new set of tires for car show use only and reserve your inexpensive tires for daily use.
Apply a tire cleaner that will allow the black rubber shine and take away any dirt that are stuck to the tires during transport.
Cleaning the Interiors
See to it that the interior of your car is clean and clutter free. Use leather agents on any leather upholstery and mild metal polish on steel accessories. Periodic vacuuming is necessary to remove the dust out of the seats and dashboard crevices.
Engine Bay
Car show fanatics recommend cleaning the engine bay first to get much of the grease and dirt before you proceed to more delicate work. Engine bay needs a great deal of work. Apply degreaser to remove thoroughly the grease then add a metal polish to shine the material.
Use soft cloths to cover the fenders in front to prevent the paint job from any drop of grease or degreaser chemical.
Glass
Cleaning the interior glass is the last step in preparing your car for a show. Use glass cleaner and soft cloths to remove fingerprints and streaks visible on the window glass especially if the show is held under the heat of the sun.
Bring with a small cleaning kit during the show for touch ups. The kit should include clean cloths, glass cleaner, mini vacuum and tire polish.
Thinking about getting a new color for your auto? You have to know more about paint and colors to distinguish which tone will best suit your lifestyle and personal preference. There are several service providers as well that will offer you a variety of styles and other designs depending on which look you wish to carry. Here are some more tips and info.
Getting the Paint
First of all, you need to choose the right tone for your car. You might want to read more about the different colors and what the statistics are. For example, red cars are known to be involved in more accidents than any other color based on studies. If you live in a warm weather country, it might be better to show off your bright colors like bright yellow, bright red or super white. Your lifestyle may also require you to get certain colors. Those who belong in the corporate world usually go for more subtle tones like navy blue, gray or black.
You can order paint from your local dealers or get it online. There are a number of web sites that specifically cater to car paint and will send your order immediately to your doorstep in just a few days after you order and pay.
Planning Tips
If you plan to repaint your car, you have to consider whether you're going for 100% repaint or just repaint a few panels. Auto detailers will provide you with special discounts if you choose to redo the entire vehicle. Metal conditioner on bare metal is ideal because the metal is etched to get rid of microscopic corrosion and rust. The shop will also use self-etching primer to keep it from corroding.
You should also ensure that the body shop does not apply lacquer putties and other primers that are fast dry and lacquer-based. These are usually used to fix imperfections and other body scratches. The products in the long run will shrink immediately after the car paint job is finished. Good quality products will fill scratches without shrinking and will present better durability and adherence.
More Repainting Details
If welding is done just before the car paint job, special weld-through primers should be used and applied just before the pieces are welded. The benefits will include added durability and better adherence. The finishing coat is important for a successful paintjob. There are now new available technologies in the market that lead to better finish. Lacquers and enamels usually have inadequate adherence and durability. There are now 2-partpolyurethane paints that will match your vehicle for more rugged functions.
DIY or Go Pro?
You should consider your budget and skills if you're planning to do the repainting yourself. You will need several tools to get the job done as well. You can save a lot of time and effort by going to a pro or service provider. Do-it-yourself paint kit are also sold at different online sites to encourage car owners to do the job themselves. Talk to experienced car painters and ask for more tips.
This website uses cookies that are necessary to its functioning and required to achieve the purposes illustrated in the privacy policy. By accepting this OR scrolling this page OR continuing to browse, you agree to our Privacy Policy